Common Questions and Problems
- How can I tell if I have the latest updates?
The easiest way is to run the update program. If it says 'Your RAILY is up to date', you have all updates installed.
The update program can be found in the Raily 4 SE program group in the Windows start menu
- I lost my license number.
Please fill in the following form:
- Turnning a selection with the K and L keys doesn't work.
Turning with "K" and "L" will not work unless there is an object in 'drag mode'. To get the selection into drag mode, klick and drag it with the mouse and keep the mouse button pressed while hitting the "K" or "L" key. The angle of rotation can be chosen in the plan settings.
- Inventory list is not stored.
There can be mutliple inventory lists, but they have to be loaded and stored explicitly. To do this, press the store / load button on the inventory tab.
- Fleischmann tracks are missing.
Several Fleischmann elements have different catalog numbers (especially switches). One number references a pair of switches, the other the individual element. In Raily there is no pair number, since this could lead to missunderstandings.
- Gradients change with drag and drop in 2D mode.
After clicking OK, the slope is created. If you move the slope in 2D mode and connect it to another element, the incline(C) will change.
This is intended behavior. The dragged element is made horizontal, affecting all attached elements of the slope. If you plan to drag a slope, please add a horizontal element in front of it. - Geometrische Probleme bei Bogenweichen.
Bei einigen Herstellern gibt es bei den Bogenweichen ein geometrisches Problem. So
verwenden die Hersteller angeblich nur die Radien r1 und r2 in den
Bogenweichen. Sie geben dann fälschlicherweise an, dass es wie unter Bild
B gezeigt, aufgehen soll.
Gibt man aber die Daten geometrisch/mathematisch exakt ein, erhält man eine Differenz wie auf Bild A.
Effektiv benutzen die Hersteller aber variable Übergangsradien und im. Auf der Anlage stört dies nicht, da man noch ein bisschen schieben kann.
Weil die Bogenweichen vor allem dazu eingesetzt werden, um Übergänge zwischen 2 verschiedenen Radien zu realisieren (s. Bild), haben wir die Lösung nun so angesetzt, dass es in diesen Fällen 2 verschiedene Versionen der gleichen Bogenweiche gibt. Bei der einen stimmt der innere Radius (markiert mit einem kleinen 'r'), bei der andern stimmt der grössere Radius (markiert durch ein grosses 'R'). Wenn man nun die Versionen richtig platziert, können die von den Herstellern vorgeschlagenen Gleisbilder trotzdem nachgebaut werden.
Beispiel: 22273L(R) der äussere Radius stimmt genau, 22273L(_r) der innere Radius stimmt genau. - I have not found the solution to my problem here ...
Please fill in the following form: